KRTS 70-12 Copper tube terminal, non-insulated, narrow palm
El-nummer: 20 141 61
Crimp cable lugs made of tinned electrolytic copper tube, without inspection hole.
KRTS is a special cable lug with an extra narrow palm (contact surface) for connection onto narrow areas. KRTS fulfills the width requirement for the palm according to IEC 61238-2 class 3, which sets the strictest (narrowest) requirements for the width of the connection point.
KRTS cable lugs have dimensions according to KRT cable lugs on the copper tube, and the crimping tools for KRT must be used.
Technical information
Cross section: 70 mm²
Material: copper
Surface treatment: Tinned
Max temperature: 150 ºC
Current max: 227 A
Inspection hole: Yes
Conductor class: 5 and 2
Connection angle: 180° (horizontal)
KRTS cable lugs are certified by Det Norske Veritas.To achieve good and lasting contact, the correct crimp tool/die (for KRT) must be used.
| Cross section (mm2) | 70 |
|---|---|
| Maximum with of palm | 25mm or less |
| Bolt dia "M" | M12 |
| Abiko no. | KRTS 70-12 |
| Elnumber | 2014161 |
| GTIN | 7070920016828 |
| Tolerance | The cable lug can be used within the limitations of the cables voltage-limit, however the crimp-geometry of the crimping-tool can set limitations. |
| Dia. (A) | 13 |
| With (B) | 22 |
| Inner dia. (C) | 12 |
| Lengde (L) | 58 |
| Sales unit | STK |
| Pcs per package | 50 |
| Weight, package (g) | 2650 |
| RoHS compliant? | Yes |
